Applications
Video over Internet for TV
Send live video over an ADSL or fiber internet connection to anywhere in the world and watch it on a television: carry an HDMI signal over the internet in real time with a BLANKOM encoder and IPTV set-top box.
- H.265 · H.264
- SRT · RTMP · HLS
- Point to point
- Full HD · 4K
- Project quotations
- Selection support
Tell us your source (HDMI, SDI), where the video goes and the internet speed at both ends; we will suggest the matching encoder and receiver. We ship worldwide from our warehouses in Germany and Turkey.
What is needed?
| What is needed | |
|---|---|
| Sending end | BLANKOM encoder with HDMI input |
| Receiving end | BLANKOM IPTV set-top box or IP decoder, connected to the television by HDMI |
| Connection | An internet connection at both ends (ADSL, VDSL, fiber or mobile) |
The link can be set up in two ways: you push the content from your site to the distant location, or you pull the signal from the distant location to your site. An internet connection is needed at both ends.
Recommended internet speed
- H.264 encoding: we recommend an upload speed of at least 2 Mbps for SD and at least 4 Mbps for HD.
- H.265 (HEVC) encoding: we recommend an upload speed of at least 1.4 Mbps for SD and at least 2.8 Mbps for HD.
- These figures are PROTEL’s application guidance; the speed needed depends on the picture content and the quality required.
Sending end: encoders with HDMI input
| Image | Model | Description | Quote |
|---|---|---|---|
 |
BLANKOM HDE-264 | HDMI to IP Encoder and Streamer | Request a quote |
 |
BLANKOM HDE-265L | HDMI to IP Encoder and Streamer | Request a quote |
 |
BLANKOM HDE-275 | 4K HDMI to IP Encoder and Streamer | Request a quote |
 |
BLANKOM HDE-276 | 4K 60fps HDMI to IP Encoder and Streamer | Request a quote |
Receiving end: set-top box and IP decoders
| Image | Model | Description | Quote |
|---|---|---|---|
|
BLANKOM 6800+ | 4K UHD IPTV set-top box (STB) | Request a quote |
 |
BLANKOM HDD-264 | IP decoder with mosaic viewer | Request a quote |
 |
BLANKOM HDD-275 / HDD-275H | 4K IP decoder with mosaic viewer | Request a quote |
 |
BLANKOM HDD-276 | 4K IP decoder and transcoder | Request a quote |
Why BLANKOM?
- Any internet connection. No leased line needed; the video travels over the public internet.
- Real time. The source signal is encoded and transmitted live.
- Matched devices. Encoder and receiver from the same brand.
- Current protocols. Models with SRT, RTMP, HLS and UDP/RTP.
Why PROTEL?
- Distributor. BLANKOM products and technical support directly from PROTEL.
- Complete system. Headend, encoder, receiver and cabling come from the same supplier.
- Selection support. We work out the system with you from sources, channel count and destination.
- Worldwide supply. Shipped from our warehouses in Germany and Turkey.
Frequently asked questions about live video to a TV
Is a static IP address needed for live transmission over the internet?
It depends on the set-up. Where the stream is pushed to a platform or server it is generally not needed; where it is pulled from the distant location the sending end has to be reachable. Describe your project and we will suggest the set-up.
How much delay is there?
The delay depends on the protocol, the encoding settings and the internet connection; the actual figure is measured on the installation.
I do not know the model code. How do I get a quotation?
Send the sources, the number of channels, the destination of the streams and the viewing points; we will suggest the system.
Request a quote
- If you know the model: model code, quantity and delivery location are enough.
- If you do not: send the sources, the number of channels, the destination of the streams (LAN, internet) and the viewing points.
- If you have a specification or project drawing: send it and we will work out the matching models.
Product names, images and technical information on this page are © BLANKOM, taken from information published by the manufacturer. Source: irenis-blankom.com