Desteklendiği Standartlar

Sivil standartlar

CISPR11.22

EN55011.55022

VDE0872.0879

ANSI-C63.4

FCC15, 18

EACL1.8

Askeri standartlar

VG95370.95377

DEF-STAN49.41

GAM-EG13

MIL-STD-461E

Main Uses

Full Compliance for EMI standards (CE, RE)
LIG Nex1’s EMI Receiver is a specialized equipment designed for EMI full compliance conforming to the international EMI standard, CISPR16-1-1. The standard pre-selector for full EMI compliance enhances the reliability of the test result by removing the interferences among the signals in the required bands, and precisely measuring the noise value of the EUT. Also, The standard tracking generator fulfills alignment of the pre-selector as well as scalar network analysis, and NSA.

Debugging for EMI R&D, Lab
During the EMI test , users can detect the exact weak points of the EUT under EMI environment specified on the EMI standards of each country, and find how to improve the design by testing its RF characteristics precisely in Spectrum Analyzer mode. LIG Nex1’s EMI receiver provides powerful spectrum analyzer performance and personalities such as Spurious Emission, Phase Noise, TOI, CCDF, and etc. basically so that users can analyze the exact weak points, and improve them

EMI Pre-Test for R&D, Manufacturing
In the fields of R&D and manufacturing for RF equipment, module, parts, and etc., LIG Nex1’s EMI receiver enables users to save high costs of the EMI Test and debugging that is regularly fulfilled by the certified EMI lab or institution on the process of development & manufacturing, and reduce the trouble shooting time. Also, users can get the reliable EMI test results under the variously simulated test environments by changing the field correction factors using the convenient correction factor table.

NSA (Normalized Site Attenuation); Environment test in Chamber
Monitoring the test environment such as antenna, turn table, and etc. in the test house (Chamber) specified in CISPR 16-1-4 automatically in real time, and correct it according to the gathered VSWR data. Users can optimize EMI test environment in the test house before starting EMI Test.

Leading in Features:

• Debugging in Spectrum Analyzer mode (Scan mode/Spectrum Debugging Mode)

• Maximum 6 sub-ranges, set frequency range, step size, Bandwidth, Measure Time etc. by ranges

• Display traces and limit lines of 3 detectors, Quasi-peak, Peak, Average simultaneously

• All Commercial EMI Standards such as KN, EN, FCC etc based on CISPR

• Amplitude Correction functions: Antenna, Cable, User’s own factors

• CISPR verification mode for EMI Lab, Institution

• X Scale Log/Linear conversion function

• Standard Built-in Pre-selector (14 pre-selection filters) for precise measurement

• Standard Built-in Tracking Generator for Pre-selector alignment and Normalized Site Attenuation in Test House

• Standard Built-in Pre-Amplifier (Gain : 20dB nominal @ 1kHz ~ 3GHz)

• 10.4” TFT Wide Screen LCD

• System OS: Windows XP Professional

• Remote control : GPIB, RS-232C, LAN Interface (Standard)

• Labview, Labwindows, CVI Driver

• Installable Printer Driver (XP)

• Optional built-in Pre-Amplifier (Gain : 30dB nominal @ 100MHz ~ 3GHz)

• Optional built-in C/W Signal Generator (1.3GHz/3.3GHz/6.6GHz)

LIG Nex1 ER-30
3 GHz EMI Analizörü

3Hz - 3GHz, -150dBm dinamik ortalama gürültü seviyesi (DANL), 10Hz RBW, 10.4 inç renkli ekran, dahili hafıza, 9 markör, USB, LAN, CD-ROM, RS-232, yazıcı bağlantısı

LIG Nex1 ER-265
26 GHz EMI Analizörü

3Hz - 26.5GHz, -150dBm dinamik ortalama gürültü seviyesi (DANL), 10Hz RBW, 10.4 inç renkli ekran, dahili hafıza, 9 markör, USB, LAN, CD-ROM, RS-232, yazıcı bağlantısı

ER-30 ingilizce broşür için ... (9.32 MB pdf dosyası)

ER-265 ingilizce broşür için ... (9.32 MB pdf dosyası)

ER serisi operating manual için ... (750 kB pdf dosyası)