Spectrum Analyzers

Bench type spectrum analyzers w/o or with tracking generator of PROMAX, remote access spectrum analyzers of NARDA

PROMAX and NARDA spectrum analyzers, with after sales support of PROTEL in Turkey and with worldwide valid original manufacturers warranties.

3 GHz Spectrum Analyzer

PROMAX AE-166/AE-167
PROMAX Spectrum Analyzer

9 kHz … 3 GHz RF spectrum analyzer

  • Frequency range up to 3 GHz
  • Resolution bandwidth from 1 Hz to 1 MHz
  • Sensitivity: -149 dBm/Hz (@PreAmp on)
  • 0.025 ppm frequency stability
  • Fastest sweep time: 307 µs
  • Remote Control via LAN, USB, RS-232
  • Built-in preamplifier, 50 dB Attenuator, and Sequence Function, AM/FM Demodulation & Analysis
  • Built-in P1dB point, Harmonic, Channel Power, N-dB bandwidth, OCBW, ACPR, SEM, TOI, CNR,
    CTB, CSO, Noise Marker, Frequency Counter, Time Domain Power, Gated Sweep
  • Built-in Spectrogram, Topographic and Dual-View Display Modes

pdf2  data sheet

3 GHz Spectrum Analyzer

PROMAX AE-366B
PROMAX Spectrum Analyzer

150 kHz … 3 GHz RF spectrum analyzer

  • Low cost 3 GHz spectrum analyser
  • AUTOSET function: One-key automatic setup of the analyser
  • Three-trace display: Max/Min hold, average…
  • Up to 5 markers: Automatic measurements on the trace
  • Graphical status bar: Easier to use
  • Split window display: Two simultaneous set-ups
  • PASS/FAIL filters: Check the values directly
  • Power measurement: ACPR / OCBW functions, Channel power…
  • Flexible connectivity: Direct connection to an external monitor
    (VGA interface), USB mass storage devices and PC

pdf2  data sheet

3 GHz Spectrum Analyzer

PROMAX AE-966/AE-967
PROMAX Spectrum Analyzer

9 kHz … 3 GHz RF spectrum analyzer

  • FREQUENCY RANGE From 9 kHz to 3 GHz
  • BANDWIDTH 3 kHz, 30 kHz, 300 kHz, 4 MHz
  • TRACKING GENERATOR Only AE-967
  • MEASUREMENT FUNCTIONS Phase jitter, OCBW, divisible screen, trigger, ACPR (adjacent power), markers, marker tracker, amplude, pre-compensation, NdB (channel bandwidth covering the specified amplitude)
  • ADVANCED OPTIONS Record and execute macros, limit lines, GO/NoGO test
  • OPTIONAL GPIB interface, AM/FM & RBW demodulator, 10 dB preamplificator

pdf2  data sheet

2.5 GHz Spectrum Analyzer

NARDA NRA-2500
NARDA Spectrum Analyzer

5 MHz … 2.5 GHz RF spectrum analyzer

  • Frequency resolution (RBW) from 1 kHz to 1 MHz
  • 30 dB input attenuator settable in 1 dB steps
  • Display range from -110 dBm to +1 dBm (RBW = 1 kHz)
  • DANL < -140 dBm/Hz
  • < 1.5 dB level measurement uncertainty at 15°C to 30°C
  • High resolution spectrum with up to approx. 600,000 measurement points
  • Detector for fixed resolution (Bins), selectable data compression with +Peak-, -Peak- or RMS storage for lower data transfer rates
  • ASCII or binary data transfer
  • Multi-Channel Power option: Level measurement in up to 500 freely definable channels
  • Level Meter (Zero Span) option: Resolution bandwidths from 100 Hz to 32 MHz

pdf2  flyer

pdf2  brochure

pdf2  data sheet

3 GHz Spectrum Analyzer

NARDA NRA-3000 RX
NARDA Spectrum Analyzer

9 kHz … 3 GHz RF spectrum analyzer

  • Frequency resolution (RBW) from 10 Hz to 20 MHz
  • 50 dB input attenuator switchable in 1 dB steps
  • Display range from -150 dBm to +21 dBm (RBW = 10 Hz)
  • DANL < -155 dBm/Hz
  • < 1.2 dB level measurement uncertainty at 15°C to 30°C
  • High resolution spectrum with up to 600,000 measurement points
  • Detector for fixed resolution (Bins) with +Peak, -Peak, or RMS detectors for data compression
    ASCII or binary data transmission
  • Multi-Channel Power option: Simultaneous level measurement in up to 500 freely-definable channels
  • Level Meter (Zero Span) option: Resolution bandwidths from 100 Hz to 32 MHz
  • Scope and I/Q Data: Real time analysis 100 Hz – 32 MHz in the time domain, I/Q data up to 32 MHz CBW (blockwise); streaming up to 400 kHz CBW

pdf2  flyer

pdf2  brochure

pdf2  data sheet

6 GHz Spectrum Analyzer

NARDA NRA-6000 RX
NARDA Spectrum Analyzer

9 kHz … 6 GHz RF spectrum analyzer

  • Frequency resolution (RBW) from 10 Hz to 20 MHz
  • 50 dB input attenuator switchable in 1 dB steps
  • Display range from -150 dBm to +21 dBm (RBW = 10 Hz)
  • DANL < -155 dBm/Hz
  • < 1.2 dB level measurement uncertainty at 15°C to 30°C
  • High resolution spectrum with up to approx. 600,000 measurement points
  • Detector for fixed resolution (Bins), selectable data compression with +Peak, -Peak, or RMS storage for lower data transfer rates
  • ASCII or binary data transmission
  • Multi-Channel Power option: Simultaneous level measurement in up to 500 freely-definable channels
  • Level Meter (Zero Span) option: Resolution bandwidths from 100 Hz to 32 MHz
  • Scope and I/Q Data option: Real time analysis 100 Hz – 32 MHz in the time domain, I/Q data transfer up to 32 MHz CBW (blockwise), streaming up to 400 kHz CBW

pdf2  flyer

pdf2  brochure

pdf2  data sheet